Skip to main content

Transom Build.

A bit of building today, cut out bits for the final bulkhead. Actually it's the Transom, and owing to the fact that metric 8' x 4' sheets of plywood are really quite a bit narrower, you have to make the transition in two halves and butt them together.
So anyway I've done that today and am now waiting for the epoxy to go off.

Comments

Post a Comment

Popular posts from this blog

Frames Done

Ok now I've finished all four of the Frames, the Bow and Transom Bulkheads and two others between. What impresses me so far it's how simple the build is. The next phase calls for me to cut out and butt join the Sides, assemble the Frames in position and then six the Sides. So I expect that any errors or bows in the Frames will show up then. But that's another day, and besides I'm not too bothered if there are a few wrinkles. She's a Pocket. Shanty Boat after all. Costs to this point are about $A200, and side from the outboard, I reckon the biggest expense apart from ply will be epoxy to waterproof below the waterline. I'm reading a pretty fab ebook at the moment called "Houseboat on the Seine". It's about an American artist who is living with his family in France where he builds and renovating a canal boat as a future residence for his family. The author is a self-confessed landlubber  and is doing the build on the cheap, so it speaks to me. Fa...
Post a Comment
Read more

Painting

Today I began sanding and priming the bulkheads. Unfortunately I tried to save a few dollars and buy a quarter litre of primer. Pffft! I've struggled to paint just the bulkheads before I ran the pot dry. So tomorrow, having realised i need to paint the sides and hull in and out, I will get a 4 litre can of primer. Live and learn!
Post a Comment
Read more

Basic Description of Harmonica

Length 13 feet, 5   feet wide, draw ing less than a foot. Weighing less than  400lbs empty, designed by Jim Michalak.     "Harmonica is a tiny shanty boat that sleeps two in its cabin. There is a porch up front suitable for lounging and a small room in the stern for the kitchen and the water closet. I think it is arranged so that two people could wait out an all day soaker without feeling too pressed. For protected waters only". Builder John wrote, "...The entire family (two adults and two children) has spent the night on Steel Will. I put 1x2's between the slats in the two forward bunks and created a single bunk that is five feet wide. We have found that the thick cushions sold to cover lawn furniture very adequate mattresses for boats." Harmonica soaks up four sheets of 3/8" plywood and six sheets of 1/4" plywood and uses simple glue and nail jigless construction. Reference for all the above: https://www.duckworks.com/product-p/jm-harmonica...
Post a Comment
Read more